With multiple uses, the efficiency of the electric shavers reduces as the stubble hair gets stuck in between the blades and prevent more hair from being cut off. Moreover, these conditions lead to hygiene problems as the bacteria build up in the shaver’s head and cause infections, pustules, acne, or other skin issues.
In this regard, it is essential to keep your electric shavers clean to prevent any sort of skin related problems and increase their optimal efficiency.
Electric Shaver Maintenance & Tips
You must clean the shaver after 3-4 days of regular shaving as beard stubble could easily build up especially if you have dense facial hair. So, you must ensure the proper cleaning of the shaver’s cutter bars and foil periodically.
With Electric Shavers, the cleaning has become easier even without a cleaning station. Yes! You heard it right, electric shavers don’t always require a proper cleaning station to get them cleaned but you can wash them manually with some easy steps.
Check out the Best Electric Razor For Elderly Man 2021
Here, a question arises “Do all electric shavers can be washed with simple soap and water?”
The answer is “No”. Only the waterproof shavers can be washed with water and soap but never try to clean an electric shaver with water if it’s not waterproof because the water can permanently damage your shaver. The non-waterproof shavers can be cleaned by the mere dry cleaning method to take off the hair out of the razor head.
In this article, we will discuss the step-by-step process of electric shaver cleaning and some important tips and tricks not only to clean but also to maintain their shaving efficiency.
How to Clean Electric Shavers ( 6 Easy Steps)
1- Remove stubble hairs by tapping
After shaving, turn the electric shaver off and take off the shaver’s foil head by pushing the buttons and gently lift it upward. Tap the frame on the countertop to release the stubble hair. But make sure not to hit the actual shaver’s foils on any surface, it is very sensitive and can easily get damaged.
You can also use a small cleaning brush to remove hairs inside the frame.
For rotary electric shavers, simply tap the frame to remove the bulk of hair.
If any lather is stuck in the frame, then avoid using the brush but give it a rinse with simple water and put back the shaver’s head.
2- Wet the shaver’s head with water and add some liquid soap
Damp the head with a little water and put a few drops of any liquid soap (shower gel, handwash, dishwashing liquid, etc.).
3- Turn On the shaver
Turn on the shaver and let the lather form nicely and covers the entire shaver’s head. You can add a few more drops of water at this point and let the shaver run for at least 10 seconds.
4- Rinse the head while it’s On
Hold the shaver in a way that the head faces downward, now gently rinse the lather off with warm water unless all the soap is washed away. This method will help to prevent the soap from getting into the shaver’s body but also flushes all the hair residues
5- Turn Off and remove the head to rinse
For more ease, remove the foil head and wash the cuter bars thoroughly so that all hair could get removed from there
6- Dry the Electric Shaver
After done cleaning, shake it off to get rid of maximum water, pat it dry with a clean towel and finally blow dry it to get rid of complete moisture. Then put back the dried head for safe shaving next time.
- You can use a blow drier to dry clean the frame.
- If you own a Panasonic electric shaver, then use sonic mode, it is a special cleaning feature that can be active by simply pressing and holding a power button till it gets on. This mode let the blades vibrate at a higher speed that can dislodge every single hair particles, dirt, and water drops.
- The rotary shaver users can deep clean it once a month whereas, standard electric shaver users can opt for the above-mentioned easy cleaning method.
- Wash the comb, retainer rings, and blade with water to increase efficiency but don’t mix them up while assembling it again. Also, add lubricant when the shaver is disassembled.
After reading the process of cleaning the shaver, you know what to do next after every shave. Since tap water is hard which could wear off the blades and it also washes away the lubricant. Therefore, after every clean-up session adds some lubricant to avoid excessive heat up due to increased friction. With this routine, not only the performance but also the shelf life of the electric shaver will increase.