How to Refill a Zippo in 2020 – 6 Step By Step Guide

Zippo is one of the most well-known brands of light out there on the market. A lot of people seem to invest in these lighters even if they are non-smokers.

The reason being is because of the quality and durability of this lighter. However, the biggest downside with these lighters is the fact they run low on lighter fluid. If you are a regular smoker, then you might run out of fluid sooner than you think.

Luckily, there are ways in which you can easily refill your Zippo lighter whenever it runs low on fluid. The manufacturer has made sure that the refilling process is known and because of that, we’ll guide you through each step on how to refill Zippo so that you have the ability to use your lighter for as long as you desire.

How to Refill a Zippo

How to Refill a Zippo

1. Step

The first thing I recommend doing is to purchase lighter fluid at your local store. You can use any fluid but for the best results, you should probably avoid low-quality products as they could cause more harm than good. After all the high-quality fluid will help to preserve the lighter for longer period of time.


View Refill Price On


2. Step

Now that you have purchased the fluid, you should turn the product upside down in order to release the lower part to allow the inside unit to come out of the lighter. You should turn it over and lift the felt pad to reveal the packing material in the fuel chamber.

If it’s never been removed before, then you’ll certainly need a paper clip or a small piece of metal in case you have a problem removing the pad – these pads tend to be a bit secured.

3. Step

You can now take your time and fill the packing with as much lighter fluid as you can. For this, I think the best method would be to transfer some of the fluid into a smaller squirt bottle so that you can control how much fluid you can release into the lighter.

If you notice any difference in the color of the lighter fluid while you are pouring it, then it’s best to stop filling the unit at once. If it’s not changing color, stop filling it once it reaches the top.

Avoid getting the lighter fluid on your skin. If you do get some on your skin, as it is a skin irritant. Make sure to use soap and water to wash it off.

4. Step

If any of the fluid has dripped out of the unit while you were pouring it inside, wipe the outside clean before thinking about putting it back inside the lighter. Leaving fluid untouched can be extremely dangerous.

5. Step

Insert the inside unit back into the case, making sure that it’s facing the right way. You should push down on it to completely insert it. Continue applying pressure to the top of the insert to ensure that it’s well secured.

6. Step

After your finish, you should let the Zippo sit and absorb the lighter fluid for about 3 minutes. Then, try lighting the Zippo to make sure you’ve successfully completed the process. If you flick the wheel and it doesn’t light, you should go back and add a little more lighter fluid or make sure that the unit is properly fitted inside the lighter.

View The Price Of A Zippo On


When it comes to refilling, Zippo lighters are extremely easy to refill. These lighters are also made to last for a very long time without breaking apart, thanks to the company’s standard of high quality.

You will need to maintain the condition of the lighter and in order to do this, you should take proper care for it on a regular basis.

Related Buyers Guide:

Leave a Reply

Your email address will not be published. Required fields are marked *